Face Mask - KN95, Face Mask - KN95, White, 10 Pack

Raw Eco Score:
Recycled Content: 0%
Greenhouse Gas Decrease: 4 lbs of carbon
Face Mask - KN95, Face Mask - KN95, White, 10 Pack
$ 8.85


This product is no longer available. We apologize for any inconvenience this may cause.

Raw Eco Score0.0Recycled %0
Product BrandProduct TypeFace Mask - KN95
Pack TypePKPack Size10
ColorWhiteSize ( W" x L" x H" )6" x 8.5" x 5"
Weight (g)0.60CertificationGB2626-200, CE
Country of OriginChina

Please follow the link below to view and download the datasheet.


Product Details:

The KN95 mask employs a fine mesh of synthetic polymer fibers specifically made with a nonwoven polypropylene fabric. It is produced by melt blowing and forms the inner filtration layer system that filters out hazardous particles. Enjoy peace of mind one of the highest protective classes KN95. Each respirator mask features maximum protection from droplets. dust, bacteria, germs. smoke. and more. KN95 masks are indicated for use when treating patients with airborne diseases such as TB or influenza. The multi-layer design reduces the spread of infections with a 0.3 Most Penetrating Particle Size (MPPS) rating of 95%. This mask has a fluid resistance penetration measurement of 160mm Hg. The CDC reports that prolonged KN95 mask use (including between patients) can be safe for up to 8 hours. Discard the mask if it is wet or dirty on the inside. if it is deformed, or if the filter is torn. A KN95 mask cannot be cleaned or disinfected.

 All the masks that we offer are graphene free.


CE Approved
Standard GB2626-2006



  • Unused masks should be kept in a sealed box and stored in a dry place, free of contaminants.
  • Do not use in temperatures over 50°C or under -5°C.
  • Made in China.


Technical Details:

box size 10 pcs | 21cm/11cm/7cm
material 5-layer fine mesh of synthetic polymer fibers, with a nonwoven polypropylene fabric
colour Light Blue
strap White Elastic
store temperature Under 50°C / above -5°C
filtration rating KN95 (MPPS) 160mmHg


Masks Filtration:

i. 3.0 Microns: Bacteria Filtration Efficiency standard (BFE).
ii. 0.1 Microns: Sub-micron particulates Filtration Efficiency standard (PFE).
iii. 0.3 Microns: Used to represent the most-penetrating particle size (MPPS), which is the most difficult size particle to capture.
iv. Fluid Resistance: Mask resistance to penetration by synthetic blood under pressure (mmHg).


Shipping & Dimensions:

Pack Size : 6 x 5 x 12 in, 1.375 lbs
Master Carton Size : 15 x 12 x 25 in, 30 lbs
Units Per Box : 10
Units Per Master Carton : 1500
Units Per Pallet :  18,000
Units Per Container : 360,000


Recycled Content: 0% Greenhouse Gas Decrease: 4.00 lbs

You Might Also Like

This application will work with the following browser versions: Internet Explorer 11 or later, Chrome 30 or later, Safari 9 or later, Firefox 29 or later, Opera 17 or later, iOS Safari 10 or later